Config:) Alarms - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710/L Broadcast Satellite Modem
Front Panel Operation

7.2.1.8 (Config:) Alarms

If you attempt to select an alarms state and the unit is in "Remote"
mode, the following messages display:
Follow the prompts. Press ENTER to change to "Local" mode. Press CLEAR to
remain in "Remote" mode. Otherwise, the following menu displays:
Use the arrow keys to select Tx, Intfc1, or Intfc2. Press ENTER.
 
(Config:) Alarms  Tx
Currently, masking of Tx Alarms (associated with the modulator) is not allowed.
Press ENTER or CLEAR to return to the previous menu.
(Config:) Alarms  Intfc1
Use the arrow keys to select TxClk. Press ENTER. This submenu appears:
 
THIS UNIT IS CURRENTLY
IN REMOTE MODE!!
DO YOU WANT LOCAL MODE?
ENT=Yes CLR=No
Alarm Mask: Tx
Intfc1 Intfc2
Tx Alarm Mask: None
Intfc1 Alarms: TxClk
Intfc1 All Faults: Alarms
Fault Mask Flt
7–50
MN/CDM710.IOM
(E)
(E)
IFOn (E)
Revision 12