Table of Contents
Advertisement
CDM-740 Advanced Satellite Modem
Front Panel Operation
5.10.2.1 FAST: Configure
FAST: Set register#:
88888888888888888888
Where # represents the selected EEPROM Register # (Word1, Word2, or Word3 on the previous
menu):
Obtain the FAST code for the new option from Comtech EF Data. Enter the code carefully. Use
the ◄ ► arrow keys to move the cursor to each character, then use the
character. When all characters are edited, press ENTER.
The modem will respond with "Configured Successfully" if the new FAST option has
been accepted; otherwise, if an invalid code is entered, the following error message is displayed:
Carefully re-enter the code after being automatically returned to the previous menu. If the
problem persists, contact Comtech EF Data Customer Support for further assistance.
5.10.3 FAST: Demo-Mode
FAST Options Demo Mode: Off (Off,On)
1209600 seconds remaining.
When enabled, Demo Mode allows access to ALL CDM-740 FAST options for 2592000 seconds
(30 full days). Demo Mode may be turned on and off an unlimited number of time until the
2592000 seconds have expired. The time count only decrements when the mode is On.
Use the
▲ ▼
display the number of seconds remaining for the free Demo Mode.
When the Demo period expires, the following menu is displayed:
FAST Options Demo Mode: Expired
000000 seconds remaining.
Word#
...Error...
...Please Verify Your Input...
arrow keys to select Demo-Mode as Off or On. When On, the bottom line will
Enter code below
then [ENTER] (
5–31
Revision 0
MN-CDM740
v)
◄►
arrow keys to edit the
▲ ▼
(v)
(v)
Advertisement
Table of Contents
