MSC1000G User's Guide
22.2 ip Commands
The following shows general IP commands that help with the management of the IP
parameters.
22.2.1 ip arp flush Command
Syntax:
ras> ip arp flush
This command clears the MSC's IP Address Resolution Protocol (ARP) table.
22.2.2 ip arp show Command
Syntax:
ras> ip arp show
This command displays the MSC's IP Address Resolution Protocol (ARP) table. This is the
list of IP addresses and matching MAC addresses that the device has resolved.
An example is shown next.
ras> ip arp show
ip address
--------------- ----- ----------------- ----------
172.23.14.65
172.23.15.172
172.23.15.254
arp entry: 3
22.2.3 ip gateway Command
Syntax:
ras> ip gateway <ip>
This command
The following example sets the system to use 172.23.15.254 as the default gateway.
ras> ip gateway
334
time ether address
300 00:00:86:47:11:91 outband
300 02:0e:a6:89:41:60 outband
300 00:04:80:9b:78:00 outband
sets the system's default gateway IP address.
172.23.15.254
interface
Chapter 22 ip Commands