Packet Filter Screen; Table 16 Dhcp Snooping: Slot - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.

Table 16 DHCP Snooping: Slot

LABEL
UP
Copy
Port
Mode
Enable
Static IP
Select

5.7 Packet Filter Screen

Use this screen to set which types of packets the switch accepts on individual DSL ports. Click
ACL > Packet Filter to display the screen shown next.
Chapter 5 Access Control List Screens
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
This field displays the filter mode (deny or accept).
This field displays whether OUI filtering is activated on the specified DSL port or
not (V for enabled, - for disabled).
This field displays the OUI address to filter on a port.
Select the radio button of the port from which you want to copy settings.
MSC1000G User's Guide
87