ZyXEL Communications MSC1000G User Manual page 498

MSC1000G User's Guide
where
<slot>
volt|temp|fan|cpu
<index>
498
= The main chassis slot where the card is located. Use the slot
number of the MSC when you configure the fan limits.
= = Set the voltage tolerance range.
voltage
= Set the temperature tolerance range.
temp
= Set the rotations per minute (RPM) tolerance range for a
fan
fan.
= Set the threshold for CPU usage.
cpu
= The index number of the sensor.
The power supply for each voltage has a sensor that is capable
of detecting and reporting if the voltage falls out of the
tolerance range. The card voltage sensors are as follows.
MSC: 1 = 2.5 V, 2 = 1.25 V, 3 = 3.3 V, 4 = 1.3 V, 5 = 15 V
ADSL line card: 1 = 1.2 V, 2 = 1.8 V, 3 = 3.3 V, 4 = 20.5 V
SHDSL line card: 1 = 1.8 V, 2 = 3.3 V, 3 = 15.0 V
The management switch card has temperature sensors that are
capable of detecting and reporting if the temperature rises above
the threshold.
Each card has three temperature sensors (1~3).
Each fan has a sensor that is capable of detecting and reporting
if the fan speed falls below the threshold of 2000 RPM.
The system has six fans (1~6).
Chapter 29 sys Commands