17.9 PPPoE Agent Information
Similar to DHCP relay option82, you can set the switch to insert line information into client
PPPoE Discover Initialization (PODI) packets. This allows a PPPoE termination server to
identify and authenticate a PPPoE client based on the specified information (such as the ISP
name or line card number).
17.9.1 acl pppoeagent clearinfo Command
Syntax:
acl pppoeagent clearinfo <vid>
This command resets the PPPoE line description for subscribers in the specified VLAN.
17.9.2 acl pppoeagent enable Command
Syntax:
acl pppoeagent enable <vid>
This command turns on PPPoE line information for subscribers in the specified VLAN. The
switch adds line information to PPPoE discover packets for user authentication and
identification.
The following example activates the PPPoE agent setting for VLAN 10.
ras> acl pppoeagent enable 10
17.9.3 acl pppoeagent delete Command
Syntax:
acl pppoeagent delete <vid>
This command removes PPPoE line information setting for the specified VLAN.
17.9.4 acl pppoeagent disable Command
Syntax:
acl pppoeagent disable <vid>
This command sets the switch to not add line information in PPPoE discover packets.
Chapter 17 acl Commands
MSC1000G User's Guide
313