Alarm Profiles; Default Settings; Adsl Port Setup; Figure 71 Adsl Port Setup - ZyXEL Communications MSC1000G User Manual

10.5 Alarm Profiles

Alarm profiles define DSL port alarm thresholds. The system sends an alarm trap and
generates a syslog entry when the thresholds of the alarm profile are exceeded. See the chapter
on profiles for how to configure alarm profiles.

10.6 Default Settings

The default profiles always exists and all of the DSL ports use the default profile settings when
the line card is shipped. The default profiles are named DEFVAL. Refer to the chapter on
initial configuration for the settings of the default profile and DSL port default settings.

10.7 ADSL Port Setup

Click Port > ADSL in the navigation panel to open the following screen. Use this screen to
configure settings for individual ADSL ports.

Figure 71 ADSL Port Setup

The following table describes the fields in this screen.

Table 40 ADSL Port Setup

LABEL
Slot
Port
Load
Enable
Chapter 10 DSL Port Setup Screens
DESCRIPTION
Select the number of a line card's slot.
Select the number of a DSL port on the line card.
Click Load to display the port's settings in the fields below.
Select this check box to turn on this port.
MSC1000G User's Guide
127