ZyXEL Communications MSC1000G User Manual page 489

Table 154 sys Commands (continued)
COMMAND
version
syslog disable
enable
server
show
time set
show
timeserver set
show
sync
user auth
delete
disable
enable
online
Chapter 29 sys Commands
v2c|v3|v3v2c
<fac> <ip>
<hh> [<mm> [<ss>]]
none
daytime <ip>
[sync]
or
time|ntp <ip>
<utc[<+|-
>0100~1200]>
[sync]
<mode>
<name>
<name>
<name>
MSC1000G User's Guide
DESCRIPTION
Sets the system to use the specified
SNMP version and access.
v2c = SNMPv2 read/write
v3 = SNMPv3 read/write
v3v2c = SNMPv3 read/write and
SNMPv2 read-only.
Turns off syslog logging.
Turns on syslog logging.
Sets the log facility (local1~local7) to log
the syslog messages to a specific file in
the syslog server. See your syslog
program's documentation for details. Sets
the syslog server IP address.
Displays the syslog settings.
Sets the system time.
Displays the current system time.
Clears the time server settings.
Sets the time service protocol and IP
address of a time server.
[sync] = Gets the time and date.
Displays the time server settings.
Gets the time and date from a predefined
time server.
Select which database the switch uses to
authenticate a user. 1 = local,
= local then radius.
Removes a user account.
Stops a user from logging in.
Allows a user to log in.
Displays information about online users
that are logged into the switch. * denotes
your session.
P
M
M
M
M
L
M
L
M
M
L
M
H
2 = radius, 3
H
H
H
L
489