Configuration File Upgrade - ZyXEL Communications MSC1000G User Manual

• Use this command to transfer the firmware file to the management switch card that you
are using (the internal firmware file is named
ftp> put firmware.bin ras
• Use this command to transfer the firmware file to a DSL line card or the management
switch card that you are not currently using. Use "fw-" followed by the number of the
slot.
ftp> put firmware.bin fw-3
• Use this command to transfer the firmware file to all of the IES-5000 DSL line cards of
the same type. Use "fw-" followed by ALC1248G-51, ALC1248G-53 or SLC1248G-22.
The following example uploads firmware to all of the ALC1248G-51 line cards in the
IES-5000.
ftp> put firmware.bin fw-ALC1248G-51

31.5 Configuration File Upgrade

Use an FTP or SFTP client to connect to the IES-5000.
C:\> ftp <IES-5000 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Transfer the configuration file to the management switch card. The configuration file on your
computer (that you want to put onto the management switch card) is named
internal configuration file on the management switch card is named
ftp> put config.dat config-0
Quit FTP.
ftp> quit
Wait for the update to finish. The system restarts automatically.
Chapter 31 Firmware and Configuration File Maintenance
MSC1000G User's Guide
.
ras)
config-0
. The
config.dat
.
521