27.3.1.2 show adsl linegain Command
Syntax:
show adsl linegain <slot-port>
This command displays the gain parameter of the active ADSL line.
27.3.1.3 show adsl linehlog Command
Syntax:
show adsl linehlog <slot-port>
This command displays the HLOG parameter of the active ADSL line.
27.3.1.4 show adsl lineqln Command
Syntax:
show adsl lineqln <slot-port>
This command displays the QLN parameter of the active ADSL line.
27.3.1.5 show adsl linetssi Command
Syntax:
show adsl linetssi <slot-port>
This command displays the TSSI parameter of the active ADSL line.
27.3.2 show arp Command
Syntax:
show arp
This command displays the MSC's IP Address Resolution Protocol table. This is the list of IP
addresses and matching MAC addresses that the MSC has resolved.
An example is shown next.
Chapter 27 show Commands
MSC1000G User's Guide
433