Figure 141 Mstp: Bridge; Table 100 Mstp: Bridge - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

Figure 141 MSTP: Bridge

The following table describes the labels in this screen.

Table 100 MSTP: Bridge

LABEL
Config Name
Revision Level
Status
Priority
Hello Time
226
DESCRIPTION
Enter a descriptive name (up to 31 characters) of an MST region.
Enter a number to identify a region's configuration. Devices must have the same
revision level to belong to the same region.
Select this option to activate MSTP on the system.
Priority is used in determining the root switch. The switch with the highest priority
(lowest numeric value) becomes the STP root switch. If all switches have the same
priority, the switch with the lowest MAC address will then become the root switch.
Enter a number between 0 and 65535. The system will automatically round the
number to the nearest multiple of 4096.
The lower the numeric value you assign, the higher the priority for this switch.
Bridge Priority determines the root bridge, which in turn determines Hello Time,
Max Age and Forwarding Delay.
This is the time interval in seconds between BPDU (Bridge Protocol Data Units)
configuration message generations by the root switch. The allowed range is 1 to
10 seconds.
Chapter 13 Switch Screens