ZyXEL Communications MSC1000G User Manual page 278

MSC1000G User's Guide
Table 125 profile Commands (continued)
COMMAND
alarmvdsl
278
set <profile> atuc
[lofs <lofs>]
[loss <loss>]
[lols <lols>]
[lprs <lprs>]
[ess <ess>] [ffr
<ffr>] [sesl
<sesl>] [uasl
<uasl>]
[fru <fru>] [iru
<iru>] [frd
<frd>] [ird
<ird>] [ift
<ift>]
or
<profile> atur
[lofs <lofs>]
[loss <loss>]
[lprs <lprs>]
[ess <ess>] [sesl
<sesl>] [uasl
<uasl>] [fru
<fru>][iru
<iru>][frd <frd>]
[ird <ird>]
show [<profile>]
delete <profile>
map <profile>
DESCRIPTION
Creates a profile of ADSL alarm
settings.
<profile> = profile name, up to 31
characters
atuc = near end
atur = far end
<lofs> = number of loss of framing
seconds, 0~900
<loss>
= number of loss of signal
seconds, 0~900
<lols> = number of loss of link
seconds, 0~900
<lprs> = number of loss of power
seconds, 0~900
<ess>
= number of error seconds,
0~900
<ffr> = number of failed fast retrains
seconds, 0~900
<sesl> = number of severely errored
seconds-line, 0~900
<uasl>
= number of unavailable
seconds-line, 0~900
<fru> = fast rate up in Kbps,
0~2147483
<iru> = interleave rate up in Kbps,
0~2147483
<frd>
= fast rate down in Kbps,
0~2147483
<ird> = interleave rate down in
Kbps, 0~2147483
<ift> = init failure trap enable, 1-
enable, 0-disable
Lists the ADSL alarm profiles or a
specific profile's settings.
VDSL alarm profiles allow efficient
configuration of VDSL alarm settings.
Removes an unreferenced VDSL alarm
profile.
Displays which VDSL ports reference
this alarm profile.
Chapter 16 Commands
P
M
L
M
L