Diagnostic Screens; Ldm Test Screen; Figure 50 Ldm Test; Table 29 Ldm Test - ZyXEL Communications MSC1000G User Manual

This chapter explains the Diagnostic screens.

7.1 LDM Test Screen

Click Diagnostic > LDM in the navigation panel to display this screen. Use this screen to
perform line diagnostics (LDM stands for Line Diagnostic Mode).

Figure 50 LDM Test

The following table describes the labels in this screen.

Table 29 LDM Test

LABEL
LDM Test
Chapter 7 Diagnostic Screens

Diagnostic Screens

DESCRIPTION
Select slot and port numbers from the Slot and Port drop-down list boxes and
click Set LDM Port to perform line diagnostics on the specified port. Only slots
with an active ADSL line card display in the Slot drop-down list box. The ADSL
port must be set to ADSL2 or ADSL2+ ADSL operational mode and have a
connection. It takes about one minute for the line diagnostics to finish. The screen
displays a message confirming upon which ADSL port line diagnostics will be
performed.
Click Get LDM Data to display the line diagnostics results after using the Set LDM
Port button on an ADSL port. Use the line diagnostics results to analyze problems
with the physical ADSL line.
Note: Wait at least one minute after using Set LDM Port before
using Get LDM Data.
MSC1000G User's Guide
C
H A P T E R
7
105