Pvc Setup Screen; Figure 89 Pvc Setup; Table 55 Pvc Setup - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

10.11 PVC Setup Screen

Click Port > PVC in the navigation panel to open the following screen. Use this screen to
view and configure permanent virtual circuit settings for individual ports.

Figure 89 PVC Setup

The following table describes the fields in this screen.

Table 55 PVC Setup

LABEL
PVC Table
Slot
Port
Load
Index
VPI / VC
Profile
MUX
Type
PVID
Priority
Select
Modify
150
DESCRIPTION
This table displays the PVCs that are configured for the selected port.
Select the number of a line card's slot.
Select the number of a DSL port on the line card.
Click Load to display the port's PVC settings in the PVC Table.
This is the number of the PVC on this port. Click a number to open a screen where you
can add the PVC to more VLANs (or remove it from VLANs).
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The
VPI and VCI identify a channel on this port.
This field displays the ATM profile that this channel uses.
This field displays the encapsulation type (llc or vc) for this channel.
This field displays whether the channel is a PVC or a PPVC.
This field displays the PVID (Port VLAN ID) to assign to untagged frames received on
this channel.
This field displays the priority value (0 to 7) that the line card adds to frames that come in
on this PVC without a (IEEE 802.1p) priority tag.
Select a PVC's radio button and then use the Modify, Copy or Delete button.
Click Modify to display the selected PVC's settings in the fields above so you can edit
them.
Chapter 10 DSL Port Setup Screens