Show Vlan Command - ZyXEL Communications MSC1000G User Manual

27.3.24 show vlan Command

Syntax:
show vlan [<vid>]
or
show vlan <start-vid> <end-vid>
This command displays the current VLANs.
The following example shows VLAN 1. It is set to send untagged Ethernet frames to the
Gigabit Ethernet subtending and uplink ports.
ras> show vlan
vid sub1
---- ----- ----- ----- -----
1 U
ras>
Chapter 27 show Commands
sub2 up1 up2
U U U
MSC1000G User's Guide
455