Profile Adsl Set Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

26.4.1 profile adsl set Command

Syntax:
profile adsl set <profile> <us-max-rate> <ds-max-rate>
[fast|delay <us-delay> <ds-delay>]
[minrate <us-min-rate> <ds-min-rate>]
[usmgn <us-max-mgn> <us-min-mgn> <us-tgt-mgn>]
[dsmgn <ds-max-mgn> <ds-min-mgn> <ds-tgt-mgn>]
[usra fixed|startup|runtime <us-us-mgn> <us-ds-mgn>]
[dsra fixed|startup|runtime <ds-us-mgn> <ds-ds-mgn>]
where
<profile>
<us-max-rate>
<ds-max-rate>
[fast|delay <us-
delay> <ds-
delay>]
[minrate <us-min-
rate> <ds-min-
rate>]
[usmgn <us-max-
mgn> <us-min-mgn>
<us-tgt-mgn>]
[dsmgn <ds-max-
mgn> <ds-min-mgn>
<ds-tgt-mgn>]
usra
dsra
<us-us-mgn>
<us-ds-mgn>
<ds-us-mgn>
<ds-ds-mgn>
406
= The descriptive name for the profile.
= The maximum ADSL upstream transmission rate
The upstream rate must be less than or equal to the
Kbps.
downstream rate.
= The maximum ADSL downstream transmission rate,
in Kbps.
= The latency mode. With interleave, you must also define the
upstream and downstream delay (1-255 ms). It is recommended
that you configure the same delay for both upstream and
downstream.
= The minimum ADSL upstream transmission rate (
and the minimum ADSL downstream transmission rate
( ).
32~32000 Kbps
= The maximum, minimum and target acceptable ADSL upstream
signal to noise margins (
= The maximum, minimum and target acceptable ADSL
downstream signal to noise margins (
measurements).
= The upstream rate adaptation setting.
= no rate adaptation
fixed
= rate adaptation at initialization
startup
= rate adaptation any time
runtime
= The downstream rate adaptation setting.
= The upstream up shift noise margin (0~310 in 0.1 dB).
= The upstream down shift noise margin (0~310 in 0.1 dB).
= The downstream up shift noise margin (0~310 in 0.1 dB).
= The downstream down shift noise margin (0~310 in 0.1 dB).
measurements).
0~310 in 0.1 dB
0~310 in 0.1 dB
Chapter 26 profile Commands
, 64~4096 in
64~32000
)
32~4096 Kbps