Alarm Severity Assignment Screen; Figure 48 Alarm Severity Assignment: Dsl; Table 25 Alarm Port Setup: Slot - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.

Table 25 Alarm Port Setup: Slot

LABEL
UP
Copy
Port
Severity
Select

6.4 Alarm Severity Assignment Screen

Click Alarm > Alarm Severity Assignment to configure the severity levels of individual
alarms and where the system is to send them. Click a tab to view the alarms specific to an
alarm category.

Figure 48 Alarm Severity Assignment: DSL

Chapter 6 Alarm Screens
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
This field displays the minimum severity level of alarms that the system records on
the port.
Select the radio button of the port from which you want to copy settings.
MSC1000G User's Guide
99