Igmp Filtering; Figure 64 Igmp Setup; Table 34 Igmp Setup - ZyXEL Communications MSC1000G User Manual

Figure 64 IGMP Setup

The following table describes the labels in this screen.

Table 34 IGMP Setup

LABEL
IGMP Mode
Static Query
VID
Static Query
VID Table
Dynamic
Query VID
Table

9.3 IGMP Filtering

With the IGMP filtering feature, you can set which IGMP groups a subscriber on a port can
join. This allows you to control the distribution of multicast services (such as content
information distribution) based on service plans and types of subscription.
You can set the device to filter the multicast group join reports on a per-port basis by
configuring an IGMP filtering profile and associating the profile to a port.
Chapter 9 IGMP Screens
DESCRIPTION
Select Enable_IGMP_Snooping to have the system passively learn multicast groups.
Select Enable_IGMP_Proxy to have the system proxy multicast traffic.
Select Disable to have the system not use either IGMP proxy or snooping.
Type the number for an IGMP proxy VLAN and click Apply to add a static VLAN on
which the system sends IGMP query messages. This should be the number of a
subscriber VLAN. The VLAN will appear in the Static Query VID Table. You must
configure the system's VLAN settings before you can set static query VIDs.
This table lists the manually added VLANs on which the system sends IGMP query
messages. These are multicast service subscriber VLANs.
Click Delete to remove the selected entry.
This table lists the IGMP query VLANs that the system has dynamically learned via
IGMP snooping or IGMP proxy. These are VLANs on which the system sends IGMP
query messages. They are multicast service subscriber VLANs.
MSC1000G User's Guide
117