ZyXEL Communications MSC1000G User Manual page 254

MSC1000G User's Guide
Table 114 Static VLAN Setting (continued)
LABEL
Enable
Registration
Tag
Page X of X
Previous/Next
Page
Modify
Delete
254
DESCRIPTION
This field indicates whether the VLAN settings are enabled (V) or disabled (-).
This column displays the VLAN membership settings of the Gigabit Ethernet
interfaces. Ports set to Normal can dynamically join the VLAN group using GVRP.
Ports set to Fix are permanent members of the VLAN group.
Ports set to Forbidden are prohibited from joining the VLAN group.
This column displays the VLAN tagging settings of the Gigabit Ethernet interfaces.
T displays if the system is to tag all frames transmitted though the port with this VLAN
group ID.
U displays if the system is not to tag all frames transmitted though the port with this
VLAN group ID.
This identifies which page of information is displayed and the total number of pages
of information.
Click one of these buttons to show the preceding/following screen if the information
cannot be displayed in one screen.
Select a VLAN's Select radio button and click Modify to edit the VLAN.
Select a VLAN's Select radio button and click Delete to remove the VLAN.You
cannot delete the CPU (management) VLAN.
Chapter 15 VLAN Screens