Profile Vdsl Delete Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

26.12.1 profile vdsl delete command

Syntax:
profile vdsl delete <profile>
where
<profile>
This command allows you to delete an individual shdsl profile by its name. You cannot delete
a profile that is assigned to any of the DSL ports in the MSC. Assign a different profile to any
DSL ports that are using the profile that you want to delete, and then you can delete the profile.
The following example deletes the
ras> profile vdsl delete standard
26.12.2 profile vdsl map command
Syntax:
profile vdsl map <profile>
This command displays which VDSL ports reference a specific profile.
The following example displays which VDSL ports use the
ras> profile shdsl map standard
26.12.3 profile vdsl set command
Syntax:
profile vdsl set <profile> <us-max-rate> <ds-max-rate> [fast|delay <us-
delay> <ds-delay>] [minrate <us-min-rate> <ds-min-rate>] [usmgn <us-max-
mgn> <us-min-mgn> <us-tgt-mgn>] [dsmgn <ds-max-mgn> <ds-min-mgn> <ds-tgt-
mgn>]
where
<profile>
<us-max-rate>
426
= A profile name.
VDSL profile.
standard
= The descriptive name for the profile.
= The maximum VDSL upstream transmission rate
Kbps. The upstream rate must be less than or equal to the
downstream rate.
profile.
standard
64~45440 in
,
Chapter 26 profile Commands