Switch Garptimer Join Command - ZyXEL Communications MSC1000G User Manual

28.6.2 switch garptimer join Command

Syntax:
switch garptimer join <join msec>
where
<join msec>
This command sets the MSC's join period timer for GVRP in milliseconds.
Switches join VLANs by making a declaration. A declaration is made by issuing a Join
message using GARP. GARP timers set declaration timeout values.
The following example sets the Join Timer to 300 milliseconds.
ras> switch garptimer join 300
28.6.3 switch garptimer leave Command
Syntax:
switch garptimer leave <leave msec>
where
<leave msec>
This command sets the MSC's leave period timer for GVRP in milliseconds.
Switches join VLANs by making a declaration. Declarations are withdrawn by issuing a Leave
message. GARP timers set declaration timeout values.
The following example sets the Leave Timer to 800 milliseconds.
ras> switch garptimer leave 800
Chapter 28 switch Commands
= This sets the duration of the Join Period timer for GVRP in
milliseconds. Each port has a Join Period timer. The allowed
Join Time range is between 100 and 32767 milliseconds; the
default is 200 milliseconds.
= This sets the duration of the Leave Period timer for GVRP in
milliseconds. Each port has a single Leave Period timer. Leave
Time must be two times larger than Join Timer; the default is
600 milliseconds. The allowed Leave Time range is between
201 and 65534 milliseconds; the default is 600 milliseconds.
MSC1000G User's Guide
467