MSC1000G User's Guide
where
<slot-port-vpi/
vci>
<vpi/vci>
This command removes a PVC from a PPVC.
The following example removes a PVC that uses VPI 8 and VCI 36 from a PPVC with VPI 8
and VCI 35 for port 5 on the line card in slot 7.
ras> port ppvc member delete 7-5-8/35 8/36
25.9.3 port ppvc member set Command
Syntax:
port ppvc member set <slot-port-vpi/vci> <vpi/vci> <atmprofile> <level>
where
<slot-port-vpi/
vci>
<vpi/vci>
<atmprofile>
<level>
This command adds a member PVC to a PPVC. You must create the PPVC before you use this
command to add a member.
The following example adds a PVC to a PPVC with VPI 8 and VCI 35 for port 5 on the line
card in slot 7. The PVC uses VPI 8 and VCI 36, the DEFVAL ATM profile and priority queue
2.
ras> port ppvc member set 7-5-8/35 8/36 DEFVAL 2
25.9.4 port ppvc set Command
Syntax:
port ppvc set <slot-port-vpi/vci> <mux> <pvid> <priority>
378
=
The slot and port(s) and VPI/VCI of the PPVC.
=
The VPI and VCI of the individual PVC that you are removing
from the PPVC.
=
The slot and port(s) and VPI/VCI of the PPVC.
=
The VPI and VCI of the individual PVC that you are adding to
the PPVC. The VPI setting can be 0 to 255. The VCI setting can
be 32 to 65535 with a VPI of 0 or 1 to 65535 if the VPI is not 0.
=
The name of an ATM profile.
=
The priority queue (0~3) to use for this PVC's traffic. 3 is the
highest priority.
Chapter 25 port Commands