Table 145 Show Enet Command Display - ZyXEL Communications MSC1000G User Manual

The following table describes labels in this example.

Table 145 show enet Command Display

LABEL
RxByte
RxPkt
RxUcastPkt
RxNUcastPkt
RxMcastPkt
RxBcastPkt
RxPkt64
RxPkt65~127
RxPkt128~255
RxPkt256~511
RxPkt512~102
3
RxPkt1024~15
18
RxOvrSizPkt
RxUndSizPkt
RxFCSErr
RxAlignErr
RxJabber
RxFragment
Chapter 27 show Commands
DESCRIPTION
This is the number of octets of Ethernet frames received that are from 0 to 1518
octets in size, counting the ones in bad packets, not counting framing bits but
counting FCS (Frame Check Sequence) octets. An octet is an 8-bit binary digit
(byte).
This is the number of packets received on this port (including multicast, unicast,
broadcast and bad packets).
This is the number of good unicast frames received.
This is the number of good non-unicast frames received.
This is the number of good multicast frames received of 64 to 1518 octets in length
(for non VLAN) or 1522 octets (for VLAN), not including Broadcast frames. Frames
with range or length errors are also not taken into account.
This is the number of good broadcast frames received of 64 to 1518 octets in
length (for non VLAN) or 1522 octets (for VLAN), not including multicast frames.
Frames with range or length errors are also not taken into account.
This is the number of frames received and transmitted (including bad frames) that
were 64 octets or less in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 65 to 127 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 128 to 255 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 256 to 511 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 512 to 1023 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received and transmitted (including bad frames) that
were 1024 to 1518 octets in length (this includes FCS octets but excludes framing
bits).
This is the number of frames received that were bigger than 1518 (non VLAN) or
1522 (VLAN) octets and contained a valid FCS.
This is the number of frames received that were less than 64 octets long and
contained a valid FCS.
This is the number of frames received with an integral length of 64 to 1518 octets
and containing a Frame Check Sequence error.
This is the number of frames received that were 64 to 1518 (non VLAN) or 1522
(VLAN) octets long but contained an invalid FCS and a non-integral number of
octets.
This is the number of frames received that were longer than 1518 octets (non
VLAN) or 1522 octets (VLAN) and contained an invalid FCS, including alignment
errors.
This is the number of frames received that were less than 64 octets long, and
contained an invalid FCS, including non-integral and integral lengths.
MSC1000G User's Guide
437