Profile Alarmvdsl Map Command - ZyXEL Communications MSC1000G User Manual

26.7.4 profile alarmvdsl map Command

Syntax:
profile alarmvdsl map <profile>
where
<profile>
This command displays which VDSL ports are set to use the specified alarmadsl profile.
The following example displays which VDSL ports use the SESalarm alarmadsl profile.
ras> profile alarmvdsl map SESalarm
slot side
---- ---- ------------------------------------------------
2 - ------------------------------------------------
3 - ------------------------------------------------
4 - ------------------------------------------------
5 - ------------------------------------------------
ras>
26.8 profile atm Commands
Use these commands to configure ATM traffic settings.
26.8.1 profile atm show Command
Syntax:
profile atm show [<profile>]
where
<profile>
This command displays the details of the specified ATM profile or lists all of the ATM profiles
if you do not specify one.
Chapter 26 profile Commands
= The name of an alarm profile.
1 2
123456789012345678901234567890123456789012345678
= A profile name.
port
3 4
MSC1000G User's Guide
417