Multicast Igmp Qryvid Set Command; Multicast Igmp Qryvid Show Command; Multicast Igmp Show Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
This command removes an IGMP query VLAN ID. The following example removes IGMP
query VLAN ID 6.
ras> multicast igmp qryvid delete 6

24.4.4 multicast igmp qryvid set Command

Syntax:
ras> multicast igmp qryvid set <vid>
This command adds an IGMP query VLAN ID. When using IGMP proxy, the device sends
IGMP queries to the members of the query VLANs. You must have already used the
commands to create the VLAN before you use this command.
The following example sets VLAN ID 6 as an IGMP query VLAN.
ras> multicast igmp qryvid set 6

24.4.5 multicast igmp qryvid show Command

Syntax:
ras> multicast qryvid show
This command displays the IGMP query VLAN IDs.
ras> multicast igmp qryvid show
igmp proxy query vlan table
vid static/dynamic
---- --------------
6 static

24.4.6 multicast igmp show Command

Syntax:
ras> multicast igmp show
This command displays the IGMP mode. The following shows an example.
ras> multicast igmp show
mode is igmpproxy
350 Chapter 24 multicast Commands
vlan