Example: Dhcp Snooping; Figure 30 Dhcp Snooping: Computer A Example; Table 10 Dhcp Snooping: Slot - ZyXEL Communications MSC1000G User Manual

The following table describes the labels in this screen.

Table 10 DHCP Snooping: Slot

LABEL
UP
Copy
Port
Enable
Static IP
Select

5.3.2 Example: DHCP Snooping

The following figures show the DHCP snooping configuration for computers A and B in the
example network shown in
DSL port 2 and computer B to DSL port 10 on the line card in slot 2.

Figure 30 DHCP Snooping: Computer A Example

Chapter 5 Access Control List Screens
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
This field displays whether DHCP snooping is activated on the specified DSL port
or not (V for enabled, - for disabled).
This field displays the static IP addresses in the DHCP snooping table for a port.
Select the radio button of the port from which you want to copy settings.
Figure 27 on page
MSC1000G User's Guide
76. In this example, computer A is connected to
79