The Web Configurator; Web Configurator Introduction; System Login; Figure 9 Web Configurator: Login - ZyXEL Communications MSC1000G User Manual

This section introduces the configuration and functions of the web configurator.

3.1 Web Configurator Introduction

The web configurator is an HTML-based management interface that allows easy switch setup
and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).

3.2 System Login

1 Start your web browser.
2 Type "http://" and the IP address of the switch in the Location or Address field. Press
[ENTER]
default out-of-band (management port) IP address.
3 The login screen appears. The default username is admin and associated default
password is 1234. The date and time display as shown if you have not configured a time
server nor manually entered a time and date in the General Setup screen.

Figure 9 Web Configurator: Login

4 Click OK to view the first web configurator screen.
Chapter 3 The Web Configurator

The Web Configurator

. 192.168.1.1is the default in-band management IP address and 192.168.2.1 is the
MSC1000G User's Guide
C
H A P T E R
3
57