MSC1000G User's Guide
Configure the fields as circled in the switch VLAN Stacking screen.
Table 49 Single and Double Tagged 802.11Q Frame Format
DA SA SPTPID Priority VID
Table 50 802.1Q Frame
DA
Destination Address
SA
Source Address
(SP)TPID (Service Provider) Tag Protocol IDentifier
VID
VLAN ID
10.8.5 VDSL VLAN Setup
Click Port > VDSL in the navigation panel to open the VDSL Port Setup screen. Select a
VDSL line card ID, a port index number and click Setup next to VLAN to open the following
screen. Use this screen to add the VDSL port to VLANs (or remove it from VLANs) and
configure the TLS (Transparent LAN Service) settings.
Figure 83 VDSL VLAN Setup
142
DA
DA
SA
TPID Priority VID
TPID Priority VID
SA
Len/Etype Data
FCS Untagged
Len/Etype Data
FCS IEEE 802.1Q
Len/Etype Data
FCS Double-tagged
Priority
802.1p Priority
Len/Etype Length and type of Ethernet frame
Data
Frame data
FCS
Frame Check Sequence
Chapter 10 DSL Port Setup Screens
Ethernet frame
customer
tagged frame
frame