Saving Your Configuration; Logging Out Of The Web Configurator; Figure 10 Web Configurator: Save Configuration On Logout - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
Table 5 Navigation Panel Links (continued)
LINK
IP Setup
Unix SysLog
User Account
VLAN
VLAN
Port Setting
Config Save

3.4 Saving Your Configuration

Click Apply in a configuration screen when you are done modifying the settings in that screen
to save your changes back to the run time memory and to make your changes take effect.
Click Config Save in the navigation panel and then the Save button to save your configuration
to nonvolatile memory. Nonvolatile memory refers to the switch's storage that remains even if
the switch's power is turned off.
Note: Use Config Save when you are done with a configuration session.
If you log out of the web configurator without saving configuration changes, a screen displays
as shown. Click Yes to save the changes or click No if you do not want to save the changes.
Unsaved changes are lost when the switch's power is turned off.

Figure 10 Web Configurator: Save Configuration on Logout

3.5 Logging Out of the Web Configurator

Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session both for
security reasons and so as you don't lock out other switch administrators.
64
DESCRIPTION
This link takes you to a screen where you can configure the in-band and out-of-band
management IP addresses and subnet masks.
This link takes you to a screen where you can configure the syslog settings.
This link takes you to screens where you can configure a user account and its level
of access privileges and authentication settings.
This link takes you to screens where you can configure static VLANs.
This link takes you to screens where you can configure port VLAN settings.
This link takes you to a screen where you can save the device's configuration into
the nonvolatile memory (the system's storage that remains even if the power is
turned off).
Chapter 3 The Web Configurator