Table 132 General alarm Command Parameters (continued)
NOTATION
for|rev
[detail]
18.3 alarm Commands
Use these commands to view and clear alarms. You can also set the device to report alarms to
an SNMP or syslog server that you specify.
18.3.1 alarm clear Command
Syntax:
alarm clear
This command erases (clearable) historic alarm entries.
18.3.2 alarm cutoff Command
Syntax:
alarm cutoff
This command cancels an alarm. This stops the sending of the alarm signal current. This is
useful in stopping an alarm if you have the alarm output connector pins connected to a visible
or audible alarm. The alarm entry remains in the system.
18.3.3 alarm edit Command
Syntax:
alarm edit <alarm> <fac> <target>[,<target>]
where
<fac>
<target>
This command creates or edits an alarm report entry.
Chapter 18 alarm Commands
DESCRIPTION
Specify the displaying order. for = forward, rev = reverse
Display more comprehensive alarm condition descriptions.
=
The log facility (
local1~local7
messages to different files in the syslog server. See your syslog
program's documentation for details.
=
snmp|syslog|all|none
device is to send (SNMP, syslog or all).
this alarm category.
MSC1000G User's Guide
) that has the device log the syslog
The type of alarm messages that the
none
disables alarm reports on
319