Figure 70 Static Multicast Slot; Table 38 Static Multicast Slot - ZyXEL Communications MSC1000G User Manual

Figure 70 Static Multicast Slot

The following table describes the related labels in this screen.

Table 38 Static Multicast Slot

LABEL
1~X
Apply
Cancel
Chapter 9 IGMP Screens
DESCRIPTION
The numbers represent the individual ports on the card.
Use the F, -, and X radio buttons to set each port's membership in the static multicast
group.
Select F to make the port a permanent member of the static multicast group.
Select - to make the port a normal member and allow it to join the VLAN dynamically.
Select X to set the port to "forbidden" meaning it is always blocked from joining the
static multicast group.
Use the All Fix, All Normal or All Forbidden button if you want to set all of the card's
ports to the same membership status for this static multicast group.
Click Apply to save the changes in this screen to the system's volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save
on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to close the screen without saving your changes.
MSC1000G User's Guide
123