Acl Dhcprelay82 Server Delete Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide

17.2.6 acl dhcprelay82 server delete Command

Syntax:
acl dhcprelay82 server delete <vid> [serverip]
where
<vid>
<serverip>
This command removes a DHCP server setting to which DHCP client requests are forwarded
in the specific VLAN.
17.2.7 acl dhcprelay82 server set Command
Syntax:
acl dhcprelay82 server set <vid> <primary-server> [secondary-server]
where
<vid>
<primary-server>
<secondary-server>
This command sets an entry for forwarding client DHCP requests received on a specific
VLAN to the DHCP server(s) at the specified IP address(es).
The following example sets 192.168.1.10 and 192.168.1.11 as the primary and secondary
DHCP servers respectively in VLAN 3.
ras> acl dhcprelay82 server set 3 192.168.1.10 192.168.1.11
17.2.8 acl dhcprelay82 set Command
Syntax:
acl dhcprelay82 set <vid>
This command creates a DHCP relay entry for the specified VLAN. After you have created an
entry, you can configure DHCP relay and relay option82 settings.
298
= A VLAN ID to be served with DHCP relay.
= The IP address of a DHCP server.
= A VLAN ID to be served with DHCP relay.
Note: The DHCP server(s) must be in the same VLAN.
= The IP address of the primary DHCP server.
= The IP address of the secondary DHCP server.
Chapter 17 acl Commands