Sys Info Show Command - ZyXEL Communications MSC1000G User Manual

where
<location>
This command sets the geographic location of the system.
The following example sets Taiwan as the system's geographic location.
ras> sys info location Taiwan

29.3.20 sys info show Command

Syntax:
sys info show
This command shows general system information, such as the RAS code, firmware version,
system uptime and bootbase version. An example is shown next.
ras> sys info show
[system info]
hostname
location
contact
frame
chassis
[master card version info]
product model
system up time
f/w version
bootbase version: VTK1.1 | 11/26/2004
database version : 14:31:08 2006/01/17
ras>
29.3.21 sys monitor set Command
Syntax:
sys monitor set <slot> volt|temp|fan|cpu <index> <high-limit> <low-limit>
Chapter 29 sys Commands
= The geographic location (up to 31 characters) of your device.
: MSC1000G
:
:
:
:
: TGE1
: 03:58:19
: V3.53(LU.0)b4-GLEN | 01/20/2006
MSC1000G User's Guide
497