Profile Alarmshdsl Delete Command - ZyXEL Communications MSC1000G User Manual

MSC1000G User's Guide
The following example sets an alarm profile named SESalarm that has the MSC send an alarm
trap and generate a syslog whenever the connection's number of severely errored seconds
exceeds three within a 15 minute period.
ras> profile alarmshdsl set SESalarm ses 3

26.6.3 profile alarmshdsl delete Command

Syntax:
profile alarmshdsl delete <profile>
where
<profile>
This command allows you to delete an individual SHDSL alarm profile by its name. You
cannot delete the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
ras> profile alarmshdsl delete SESalarm
26.6.4 profile alarmshdsl map Command
Syntax:
profile alarmshdsl map <profile>
where
<profile>
This command displays which SHDSL ports are set to use the specified alarmshdsl profile.
The following example displays which SHDSL ports use the SESalarm alarmshdsl profile.
ras> profile alarmshdsl map SESalarm
26.7 profile alarmvdsl Commands
Configure alarmadsl profiles to set alarm settings and thresholds for the VDSL ports.
414
= The name of an alarm profile.
= The name of an alarm profile.
Chapter 26 profile Commands