24.7.1 multicast igmpfilter set Command
Syntax:
switch igmpfilter set <slot-port> <igmpfilter>
where
<igmpfilter>
This command sets an ADSL port(s) to use an IGMP filter profile.
The following example sets ADSL port 9 in slot 7 to use the
ras> multicast igmpfilter set 7-9 voice
24.7.2 multicast igmpfilter show Command
Syntax:
multicast igmpfilter show <slot>
This command displays which IGMP filter profile DSL ports are using.
The following example displays which IGMP filter profiles the DSL ports in slot 3 are using.
ras> multicast igmpfilter show 3
<<slot3 igmpfilter configuration>>
port igmpfilter
---- -------------------------------
1 DEFVAL
2 DEFVAL
3 DEFVAL
4 DEFVAL
5 DEFVAL
6 DEFVAL
7 DEFVAL
8 DEFVAL
9 DEFVAL
------------------------- [ snip ] -------------------------
44 DEFVAL
45 DEFVAL
46 DEFVAL
47 DEFVAL
48 DEFVAL
24.8 multicast mvlan Commands
Use these commands to configure VLAN multicast settings and set multicast port members.
Chapter 24 multicast Commands
=
The name of an IGMP filter profile.
MSC1000G User's Guide
IGMP filter profile.
voice
353