Firmware Upgrade Screen; Reboot Screen; Figure 58 Restart After Load Factory Defaults; Figure 59 Fw Upgrade - ZyXEL Communications MSC1000G User Manual

Figure 58 Restart After Load Factory Defaults

8.4 Firmware Upgrade Screen

Click Maintenance > Firmware Upgrade in the navigation panel to open the following
screen. Use this screen to view your current firmware version number and upload firmware to
cards in the system. Make sure you have downloaded (and unzipped) the correct model
firmware and version to your computer before uploading to the card.
Note: Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage a card.

Figure 59 FW Upgrade

Select the check boxes beside the card or cards to which you want to upload firmware. You
can simultaneously upload firmware to cards of the same type. You can only upload firmware
to cards that are active.
Type the path and file name of the firmware file you wish to upload in the File Path text box
or click Browse to locate it. After you have specified the file, click Upgrade.
After the firmware upgrade process is complete, use this screen to verify your current
firmware version number.

8.5 Reboot Screen

Click Maintenance > Reboot in the navigation panel to open the following screen. Use this
screen to restart the system without physically turning the power off.
Chapter 8 Maintenance Screens
MSC1000G User's Guide
113