Port-Based Vlan Setup; Configure A Port-Based Vlan - ZyXEL Communications XS3800-28 User Manual

28-port 10gbe l3 managed switch
Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

Table 54 Advanced Application > VLAN > VLAN Configuration > Vendor ID Based VLAN Setup
L ABEL
Delete
Cancel
9.13 Po rt- Ba se d VL AN Se tup
Port-based VLANs are VLANs where the packet forwarding decision is based on the destination MAC
address and its associated port.
Port-based VLANs require allowed outgoing ports to be defined for each port. Therefore, if you wish to
allow two subscriber ports to talk to each other, for example, between conference rooms in a hotel, you
must define the egress (an egress port is an outgoing port, that is, a port through which a data packet
leaves) for both ports.
Port-based VLANs are specific only to the Switch on which they were created.
Note: When you activate port-based VLAN, the Switch uses a default VLAN ID of 1. You
cannot change it.
Note: In screens (such as
The port-based VLAN setup screen is shown next. The
Ethernet ports.
9.13.1 C o nfig ure a Po rt- Ba se d VL AN
Select
Po rt Ba se d
Applic a tio n
Select either
security requirements. If VLAN members need to communicate directly with each other, then select
. Select
C o nne c te d
save your settings.
The following screen shows users on a port-based, all-connected VLAN configuration.
DESC RIPT IO N
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click
to remove the selected entry from the summary table.
De le te
Click
to clear the check boxes.
C a nc e l
IP Se tup
as the VLAN Type in the
>
from the navigation panel to display the next screen.
VL AN
or
All C o nne c te d
Po rt Iso la te d
if you want to restrict users from communicating directly. Click
Po rt Iso la te d
XS3800-28 User's Guide
Chapter 9 VLAN
and
) that require a VID, you must enter 1 as the VID.
Filte ring
management port forms a VLAN with all
C PU
>
Ba sic Se tting
Switc h Se tup
from the drop-down list depending on your VLAN and VLAN
154
screen and then click
Adva nc e d
All
to
Apply

Advertisement

Table of Contents
loading

Table of Contents