Configuring Forbidden Router Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
The following example shows how to configure VLAN 5 as the multicast VLAN, and set port
1/0/5 as the static router port:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping multi-vlan-config 5 rport interface gigabitEthernet
1/0/5
Switch(config)#show ipv6 mld snooping multi-vlan
Multicast Vlan:Enable
Vlan Id: 5
Router Time:300
Member Time:260
Replace Source IP:::
Static Router Port:Gi1/0/5
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end
Switch#copy running-config startup-config

Configuring Forbidden Router Port

Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping multi-vlan-config [ vlan-id ] router-ports-forbidden interface
{gigabitEthernet port-list | port-channel port-channel-id }
vlan-id
port-list
VLAN.
Step 3 show ipv6 mld snooping multi-vlan
Show the MLD snooping configuration in the multicast VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
specifies the multicast VLAN to be configured.
and are the ports that cannot become router ports in the multicast
port-channel-id
Configuring MLD Snooping
Configuration Guide 334