TP-Link T1600G-18TS Configuration Manual page 641

Configuring Network Security
2) Choose the menu Network Security > AAA > RADIUS Server to load the following
page. Configure the Server IP as 192.168.0.10, the Shared Key as 123456, the Auth Port
as 1812, and keep the other parameters as default. Click Add to add RADIUS Server 1
on the switch.
Figure 8-18 Add RADIUS Server 1
3) On the same page, configure the Server IP as 192.168.0.20, the Shared Key as 123456,
the Auth Port as 1812, and keep the other parameters as default. Click Add to add
RADIUS Server 2 on the switch.
Figure 8-19 Add RADIUS Server 2
4) Choose the menu Network Security > AAA > Server Group to load the following page.
In the Add New Server Group section, specify the group name as RADIUS1 and the
server type as RADIUS. Click Add to create the server group.
Configuration Examples
Configuration Guide 618