Using The Gui - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Figure 5-17 Network Topology for Multicast Filtering
Demonstrated with T1600G-52TS, this section provides configuration procedures in two
ways: using the GUI and using the CLI.

5.4.4 Using the GUI

1) Choose the menu Multicast > IGMP Snooping > Snooping Config to load the following
page. Enable IGMP Snooping globally, and keep the default values in the Router Port
Time and Member Port Time fields.
Source
Gi1/0/1
Host B
Receiver
VLAN 10
Querier
Gi1/0/4
Gi1/0/3
Gi1/0/2
Host D
Host C
Receiver
Receiver
Configuration Examples
Configuration Guide 363