Configuring Voice Vlan Mode On Ports - TP-Link T1600G-18TS Configuration Manual

Configuring Voice VLAN

2.1.3 Configuring Voice VLAN Mode on Ports

Choose the menu QoS > Voice VLAN > Port Config to load the following page.
Figure 2-3 Configuring Voice VLAN Mode on Ports
Follow these steps to configure voice VLAN mode on ports:
1) Select your desired ports and choose the port mode.
Port Mode
Member State
2) Set the security mode for selected ports.
Choose the way of adding the selected ports to the voice VLAN.
Auto: When a port receives a voice packet whose resource MAC address
matches an OUI address, the switch automatically adds the port to the voice
VLAN.
If you choose the Auto mode for the selected ports, make sure traffic from your
voice device is tagged.
Manual: You manually add the ports connecting voice devices to the voice VLAN.
Displays the current state of the ports that are connected to voice devices.
Active: The corresponding port is in the voice VLAN.
Inactive: The corresponding port is not in the voice VLAN.
Voice VLAN Configuration
Configuration Guide 467