Configuring The Poe Parameters Using The Profile - TP-Link T1600G-18TS Configuration Manual

Configuring PoE

2.1.2 Configuring the PoE Parameters Using the Profile

 Creating a PoE Profile
Choose the menu PoE > PoE Config > PoE Profile to load the following page.
Figure 2-2 Create a PoE Profile
Follow these steps to create a PoE profile:
1) In the Create PoE Profile section, specify the desired configurations of the profile.
Profile Name
PoE Status
PoE Priority
Power Limit
2) Click Apply.
Specify a name for the PoE profile.
Specify the PoE status for the PoE profile.
Specify the priority level for the PoE profile. The following options are provided:
High, Middle and Low. When the supply power exceeds the system power limit,
the switch will power off PDs on low-priority ports to ensure stable running of
other PDs.
Specify the maximum power the port can supply for the PoE profile. The following
options are provided:
Auto: The switch will allocate a value as the maximum power that the port can
supply automatically.
Class1: The maximum power that the port can supply is 4W.
Class2: The maximum power that the port can supply is 7W.
Class3: The maximum power that the port can supply is 15.4W.
Class4: The maximum power that the port can supply is 30W.
Manual: Enter a value manually.
PoE Power Management Configurations
Configuration Guide 491