TP-Link T1600G-18TS Configuration Manual page 50

Managing System
Current System
Time
Current Time
Source
In the Time Config section, follow these steps to configure the system time:
1) Choose one method to set the system time and specify the information.
Manual
Get Time from
NTP Server
Synchronize
with PC's Clock
2) Click Apply.
Displays the current date and time of the switch.
Displays the current time source of the switch.
Set the system time manually.
Date: Specify the date of the system.
Time: Specify the time of the system.
Set the system time by getting time from NTP server.
is accessible on your network. If the NTP server is on the Internet, connect the
switch to the Internet first.
Time Zone: Select your local time zone.
Primary Server: Enter the IP Address of the primary NTP server.
Secondary Server: Enter the IP Address of the secondary NTP server.
Update Rate: Specify the interval the switch fetching time from NTP server, which
ranges from 1 to 24 hours. The default value is 12 hours.
Synchronize the system time of the switch with PC's clock.
System Info Configurations
Make sure the NTP server
Configuration Guide 27