TP-Link T1600G-18TS Configuration Manual page 543

Configuring ACL
Follow these steps to bind the Policy to a Port:
Select the Policy and the port to be bound, and click
Policy Name
 Binding the Policy to a VLAN
Choose the menu ACL > Policy Binding > VLAN Binding to load the following page.
Figure 2-12 Binding the Policy to a VLAN
Follow these steps to bind the Policy to a VLAN:
Select the ACL and enter the VLAN ID, and click
ACL ID
VLAN ID
Verifying the Binding Configuration
 Verifying the ACL Binding
You can view both port binding and VLAN binding entries in the table. You can also delete
existing entries if needed.
Select a Policy from the drop-down list.
Select an ACL from the drop-down list.
Enter the VLAN ID.
Apply.
Apply.
ACL Configurations
Configuration Guide 520