Enabling Igmp Snooping Globally - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
2.2 Using the CLI

2.2.1 Enabling IGMP Snooping Globally

Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping
Enable IGMP Snooping Globally.
Step 3 end
Return to privileged EXEC mode.
Step 4 show ip igmp snooping
Show the basic IGMP snooping configuration.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
2.2.2 Enabling IGMP Snooping on the Port
Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel port-channel-id | range port-channe port-channel-list }
Enter interface configuration mode.
Step 3 ip igmp snooping
Enable IGMP Snooping on the specified port.
Step 4 end
Return to privileged EXEC mode.
Step 5 show ip igmp snooping
Show the basic IGMP snooping configuration.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IGMP Snooping globally and enable IGMP
Snooping on port 1/0/3:
Switch#configure
Switch(config)#ip igmp snooping
IGMP Snooping Configurations
Configuration Guide 284