TP-Link T1600G-18TS Configuration Manual page 371

Configuring Layer 2 Multicast
4) Choose the menu VLAN > 802.1Q VLAN > Port Config to load the following page.
Configure the PVID of port 1/0/1-4 as 10.
Figure 5-5 Create VLAN and Add Member Ports
5) Choose the menu Multicast > IGMP Snooping > VLAN Config to load the following
page. Enable IGMP Snooping in VLAN 10. Keep 0 as the Router Port Time and Member
Port Time, which means the global settings will be used.
Configuration Examples
Configuration Guide 348