Port Config - TP-Link T1600G-18TS Configuration Manual

Configuring LLDP

3.1.2 Port Config

Choose th menu LLDP > LLDP-MED > Policy Config to load the following page.
Figure 3-2 LLDP-MED Port Config
Follow these steps to enable LLDP-MED:
1) Select the desired port and enble LLDP-MED. Click Apply.
2) Click Detail to enter the following page. Configure the TLVs included in the outgoing
LLDP packets. If Location Identification is selected, you need configure the Emergency
Number or select Civic Address to configure the details. Click Apply.
LLDP-MED Configurations
Configuration Guide 638