Accessing the Switch
Figure 2-8 Specify the IP address
3) Enter the new IP address in the web browser to access the switch.
4) Click Save Config to save the settings.
Configure the Default Gateway
The following example shows how to configure the switch's gateway. By default, the switch
has no default gateway.
1) Go to page Routing > Static Routing > IPv4 Static Routing Config . Configure the parameters
related to the switch's gateway and click Create.
Figure 2-9 Configure the default gateway
Destination
Subnet Mask
Next Hop
Specify the destination as 0.0.0.0.
Specify the subnet mask as 255.255.255.0.
Configure your desired default gateway as the next hop's IP address.
Web Interface Access
Configuration Guide
9