Configuring Server Groups - TP-Link T1600G-18TS Configuration Manual

Configuring Network Security
Shared Key
Server Port
2) Click Add to add the TACACS+ server on the switch.

7.1.3 Configuring Server Groups

The switch has two built-in server groups, one for RADIUS servers and the other for
TACACS+ servers. The servers running the same protocol are automatically added to the
default server group. You can add new server groups as needed.
Choose the menu Network Security > AAA > Server Group to load the following page.
Figure 7-4 Add New Server Group
The two default server groups in the list cannot be edited or deleted. You can follow these
steps to configure a new server group:
1) In the Add New Server Group section, configure the group name and the server type,
and click Add to add the new server group.
Server Group
Server Type
2) Select the newly added group, and click edit in the Operation column.
Enter the shared key between the TACACS+ server and the switch. The
TACACS+ server and the switch use the key string to encrypt passwords and
exchange responses.
Specify the TCP port used on the TACACS+ server for AAA. The default setting is
49.
Specify a name for the server group.
Select the server type for the group. The following options are provided: RADIUS
and TACACS+.
AAA Configuration
Configuration Guide 588