TP-Link T1600G-18TS Configuration Manual page 622

Configuring Network Security
Step 4
Step 5
Step 6
Step 7
The following example shows how to apply the existing Login method list named Login1
and Enable method list named Enable1 for the application Telnet.
Switch#configure
Switch(config)#line telnet
Switch(config-line)#login authentication Login1
Switch(config-line)#enable authentication Enable1
Switch(config-line)#show aaa global
......
Module
Telnet
Ssh
Http
Switch(config-line)#end
Switch#copy running-config startup-config
 SSH
Follow these steps to apply the Login and Enable method lists for the application SSH:
Step 1
Step 2
enable authentication { method-list }
Apply the Enable method list for the application Telnet.
: Specify the name of the Enable method list.
method-list
show aaa global
Verify the configuration of application list.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Login List Enable List
Login1 Enable1
default default
default default
configure
Enter global configuration mode.
line ssh
Enter line configuration mode.
AAA Configuration
Configuration Guide 599